Category Archives for "Pat Testing"

Pat Test Bolton Location Details

Pat Testing Bolton Lancs

Kennedy Pat Testing Flexspace Manchester Road Bolton BL3 2NZ

01204 323201

​Portable Appliance Testing in the UK - or PAT Testing in the UK- is a necessary part of employee training or appliance inspection for all companies and self-employed 
individuals, as well as schools, hospitals and various other environments and sectors.

Bolton, a rich and diverse business area of Lancashire, and therefore 
must do its utmost to be compliant with the testing and inspection of their electrical equipment if it's used by staff or customers.

With the introduction of Electricity at Work Regulations (1989), guidelines came in concerning electrical equipment. 

Adhering to regulations may require attending 
Health and Safety courses. When it comes to maintaining and inspecting equipment, qualified individuals - either within the company or an outsourced 
electrician - may carry out portable appliance testing to ensure that all equipment used by the company or body is functioning the way it should.

PAT testing (Portable Appliance Testing) ensures that electrical appliances are checked regularly and accurately so that the safety of the user is protected. 


Testing is simple and effective, allowing users to quickly identify whether an appliance has passed or failed the safety check.

An appliance that has been tested will be labelled for guidance.

A sticker will be placed in clear view and should ideally be placed on the cable as close to the 
plug as possible and with simple colour coding to indicate its condition to the user.

If an appliance has passed and is deemed safe for use, it will be marked 
with a green label. If an appliance has failed and therefore should not be used, the label will be red.

If the appliance has passed the PAT Test, the green label will have a 'pass date', as well as a date that indicates when the appliance should next be tested.

A red 
label will also show a 'fail date'. Further information provided on the PAT testing label may vary, depending on the issuing company and the chosen design.

If an appliance fails the PAT Test, there could be some possible reasons. It may be that the plug is damaged or has been wired incorrectly. There may be an 
incorrect fuse or a faulty mains cable. If the problem is more severe, the PAT engineer will advise that use of the item be discontinued.

Singular workers ought to be made mindful of potential dangers with regards to the utilisation of compact machines. For instance, if an attachment's wiring is 
free or frayed, the hardware ought not to be utilised, and the assigned individual from staff educated.

Shortcomings ought to be accounted for to 
administration, and signage presented over the hardware on keeping its utilisation by others.

Different procedures, for example, the investigation of 
apparatuses for any indications of harm, can likewise anticipate mishaps or diminish the danger of business related fatalities.Employees may be trained to 
spot potential problems before starting to operate portable machinery. In this way, the risk of electrical fires and other accidents is averted.


Statistically, many of the accidents and incidents logged by health and safety authorities could be avoided if quick visual checks are carried out by 
employees on portable equipment. These matters - and more complicated issues that may arise when it comes to the use of electrical equipment - may be learned 
by employees at courses given by Health and Safety compliance bodies that deal with PAT Testing in the UK.

The Electricity at Work Regulations 1989 compels those who use electrical systems and their employers to maintain those systems to a possible degree to prevent 
danger. Other regulations include those from Europe: The European Low Voltage Directive concerns the manufacture or importation of electrical appliances. 
This aspect of the law is overseen by Trading Standards. However, it is important that equipment remains safe while it is being used.

When an engineer comes to site from Kennedy Pat Testing Bolton to carry out PAT Testing then he will undertake several tests on individual appliance and those test will be:-

* A Full Visual Inspection
* An Insulation Test
* An Earth continuity Test
* An Earth leakage test

Continue reading

Pat Test Ashton Under Lyne Tameside

Tameside & Ashton Pat Testing

Kennedy Pat Testing
277 Stockport Road
Ashton-under-Lyne
OL7 0NT
0161 850 2274

Portable Appliance Testing has become one of the most popular activities that enhance the safety of many electrical appliances in many areas. PAT always ensures that electrical appliances are routinely checked for any defaults or malfunction. Portable Appliance Testing may not be only necessary for home appliances, but also for businesses, hotel, school, hospitals or any other institution or organization that uses electrical appliances. Because of the safety necessities of electric appliances, the market now has been filled by so many companies offering Portable Appliance Testing services. Some of the companies are genuine, but others will only play scam on you. Therefore, it is important that you consider different professionalism elements before falling for the services of any PAT company. The following are the tips on How to decide on a Portable Appliance Testing (PAT) company; 1. Check on company certification and license Certification is the most important aspect to consider before you make up your mind on choosing a particular PAT company. If a company has a license and a certificate on Portable Appliance Testing services, then it means that it is operating legally, and you can trust them on different aspects. A certified company will offer very quality and satisfactory services, unlike the uncertified ones. In the case of any damages caused by the electric appliances, a licensed company will take care of everything because it usually has an insurance cover. 2. Look at the customer reviews The customer reviews are always found on their website. The reviews will show you the reactions of different clients, who have been served by the company before, concerning the quality of services they offer. If the reviews have a higher percentage of positive comments, then you can make a decision of choosing that company. But if the reviews have a higher percentage of negative comments, then you better avoid it. 3. Ask around The best way to decide on a PAT company is to as your, friends, relatives or workmates. Some of these people might have much information on the best Portable Appliance Testing Company in your locality. They might also have the first-hand experience, as they might have been served by the company before. So always consult before you make a decision on which company to be served with. 4. Look at the Company’s reputation This means that you should look at how the company has been handling legal and ethical issues. Consider what people say about the company and for how long it has been operating. A company might have a poor reputation because of the poor services it offers, or the unqualified personnel who act as their staff members. Such companies should be avoided at all cost because they are most likely not going to be helpful. 5. Do not look at the cost of their services. It is not automatic that a company with very high service rates will offer excellent services, and the one with lower rates will offer poor services. No, this is not true because the amount you pay for a service cannot determine the quality of the service. What will determine the quality of the service is the experience, professionalism and the knowledge the PAT personnel has. Before you decide on any PAT company, always ensure that you consider the above tips, for you to get quality and reliable services.

Pat Test Manchester

PAT Test Manchester Location

Kennedy Pat Testing
13Th Floor, City Tower, Piccadilly Plaza
Manchester
M1 4BT
0161 850 4664

In today’s age of advanced scientific and technological advancements, electronic and electrical appliances have become an integral part of any domestic household.

The use of electrical devices and appliances in a typical household is very mainstream nowadays.

These devices include appliances such as microwave ovens, air conditioners, clothing irons, washing machines and dryers, refrigerators, televisions, vacuum cleaners, computers, radiators, hair dryers, hair straighter and curlers, dishwashers and sewing machines etc.

The maintenance and care of these appliances is very important to ensure the safety, risk-free usage and to prevent harm to workers.

Many appliance manufacturers recommend testing at regular intervals to ensure persistent safety.

Portable appliance testing (abbreviated as PAT) is a name of a process through which electrical appliances are routinely checked to ensure that they are safe to use.

Testing involves visual inspection of the equipment and cables, and where required, inspection of grounding (earthing) wires, and a test of the stability of insulation between the current carrying wires and any exposed metal they might be touching.

Most electrical appliances defects can be found through visual examinations but there are some which can only be found through proper testing.

A user who has some basic training or is assisted by the use of a brief checklist can also perform a brief check which can be a very important part of any electrical maintenance regime.

However, a more formal visual check and testing is carried out by a trained and learned professional.

The frequency of this testing depends upon the type of appliance and the environment in which it is used.

There are some appliances which require examination more frequently than others.

One should keep a record of all previous inspections and testing. It can be a useful tool for monitoring and reviewing the effectiveness of the maintenance regime.

The test an appliance undergoes depends on the kind of appliance and its electrical class.

There are various types of tests such as an earth resistance test, earth continuity test; insulation resistance test, polarity check and safety switch tests.

An earth resistance test shows the resistance offered by the earthing rods with the connection leads.

The maximum value of the earthing resistance should be less than 1ohm. In an earth continuity test, the equipment is tested to ensure that the earthing conductor of an extension cord, protective earth circuit or appliance cord set has a measured resistance which does not exceed 1ohm. This test is carried out using an ohmmeter or a PAT tester.

An insulation resistance test is one in which a voltage is applied (particularly a highly controlled, stabilized DC voltage) to measure the amount of current flowing through the dielectric and then a resistance measurement is calculated using Ohm’s Law. 

The resistance measurement is in mega ohms and is used to evaluate insulation integrity.

The insulation resistance test can be used as a quality control measure when a piece of electrical equipment is produced, an installation requirement to ensure that specifications and met and to verify proper hookup, to keep a periodic maintenance check and as a troubleshooting tool.

Another type of test carried out during PAT is the polarity test. In places where the sockets are polarized, polarity testing is a simple test that is carried out using a polarity tester to determine whether the active and neutral ends of the plug are correctly connected to the corresponding terminals at the socket end.

While the safety switch test has two methods. One is the press button method and the other is the applied current method.

Kennedy Pat Testing Manchester – Portable Appliance Testing Services

Kennedy Pat Testing 
Call us on
0161 850 4664 Monday - Friday 9am - 5pm to receive a FREE QUOTE, or enter your details into the form on the right.

PAT Testing or portable appliance testing of electrical devices needs to be an important part of our everyday lives.

The Health and Safety Executive recommend that all electrical appliances within residential and commercial properties engage in the services of PAT testing companies annually.

With increase in influx of cheaper electrical goods from foreign countries due to globalization, most of these imported electrical devices have not undergone as strict a testing procedure as the devices manufactured in the UK.

Thus, periodic safety checks using PAT Testing of these devices has become of the utmost importance to ensure safety and well-being.

Reasons as to why portable electrical appliances should be tested using PAT testing Manchester company Kennedy portable appliance testing include legal compliance, insurance compliance, protection of integrity and professionalism, protection from any legal action, protection of employees and staff and protection for visitors.

According to the Health and Safety Executive, portable electrical appliances account for almost 25 percent of all reported electrical accidents.

So it’s therefore extremely important that PAT testing companies be allowed to provide their services.

The Management of Health and Safety at Work Regulations 1999, the Electricity at Work Regulations 1989, the Workplace (Health, Safety and Welfare) Regulations 1992 and the Provision and Use of Work Equipment Regulations 1998 also attach great relevance to the need of electrical maintenance, and the importance of PAT testing.

The majority of equipment defects can be found during a formal visual inspection carried out by a competent person. However, to identify all potentially harmful faults, a programme of periodic inspection using a business like PAT testing Manchester company Kennedy Pat testing and those tests need to be carried out in addition to visual inspection.

Combined inspection and portable appliance testing measures is something that portable appliance testing Manchester company Kennedy Pat Testing have been providing for the last 5 years.

For example, maintenance procedures in a small low-risk office may differ from those in a larger operating area. This involves ensuring that the correct pat testing equipment is used, recognizing that the correct tests have been carried out at the right time and in the correct sequence and providing records of test results and outcomes in the form of a PAT testing certificate.

So, with this in mind, economical and effective maintenance of portable electrical equipments can be executed through a combination of portable appliance testing checks including checks, formal visual inspection and periodic electrical testing to find out any underlying fault or issue. However, it is this combined inspection and testing procedure which requires a greater level of proficiency and expertise than for inspection alone.

In regards to this, the Electricity at Work Regulations 1989 requires that the portable appliance testing should be carried out by a competent person who can accurately identify those items to be checked and tested, which tests are suitable, how to carry out the tests and how to comprehend the results that should be in the form of a pat test certificate.

One can hire a service provider such as pat testing Manchester based company Kennedy portable appliance testing who can test all of their appliances, both stationary and portable, in order to sustain the working tools.

There are some people who choose to purchase their own pat testing equipment but they are not sufficiently insured to perform this task.

If any case of discrepancy arises in their testing, they could be highly accountable for anything that happens to their appliances or machines and anyone who uses or operates them.

There is a set of pat testing procedures and rules involved in how testing and inspection of electrical appliances and devices should be carried out.

Thus, pat testing Manchester company Kennedy have undertaken these portable appliance testing courses which is vital to understanding and comprehending these procedures.

PAT testing courses not only involve the real time testing of electrical appliances, they also involve procedures on how to prevent damage to electrical appliances and how to avoid accidents or potential health hazards before working upon them, which is also of the utmost importance.

PAT testing services courses have great significance not only for the employees but also for the companies and organizations that employ them.

After all, a PAT testing requirements course renders the necessary theoretical and practical knowledge about testing and inspecting all kinds of electrical appliances, thus ensuring the safety and well-being of the people handling them and those surrounding them.

Usually, once PAT testing companies have carried out on an electrical appliance, a sticker is placed on its surface to show that it has been tested.

A pat testing certificate is made showing the details of the testing. The portable appliance testing certificate contains some minimum details such as the details of the site that has been tested; an entry for each appliance along with a tag which shows whether it has passed or failed, individual re-test dates and the details and specifications of the person or company which carried out the testing and inspection.

By keeping a record of all these pat testing inspections, it gives the company or person the added security and soundness of knowing that they have taken the necessary precautions to prevent any possible threat posed by these appliances and to ensure the safety of their equipment.

This not only serve to make sure that the equipment runs smoothly and doesn’t cause harm to anyone, it can also help in the in the event of an insurance claim as proof of compliance with health and safety regulations and rules.

Pat testing companies which neglect the regular testing and inspection of electrical appliances by a competent and skilled person are not only potentially undermining their insurance policies but are also endangering their employees or even members of the public.

If a fault arises in an appliance which has not been checked or tested by a qualified individual, then the consequences could prove to be fatal.

PAT testing is a practical skill and the best way to learn it is to undergo a traditional training course run by an experienced provider or organization, where a person can get a mix of theory and hands-on practical experience.

Although there are some organizations which promote online training or training by simply watching a DVD, there is no substitute for actually operating and working with the equipment. In some courses, one also gets to try out different “industry standard” PAT testers, from the most basic PASS or FAIL devices to the latest computerized downloading PAT testing machines.

Another thing to take into consideration when choosing a PAT testing Course company is the course size. A smaller group with a maximum of 10 to 12 people will allow the space to cope with practical sessions and the time to answer individual questions.

According to the Health and Safety Executive, 25% of all reported electrical accidents involve portable electrical appliances. Thus, keeping in view these figures, it is clear that a large proportion of incidents and injuries caused by faulty or misused equipment can be prevented with proper electrical checking, inspection and periodic safety testing.

Pat Testing Manchester PAT Test Costs PAT Testing Services PAT Electrical Testing Periodic Inspection PAT Testing For Landlords

Electrical Safety Check Manchester Landlords Electrical Certificate PAT Testing GTR Manchester Portable Appliance Testers Electrical Appliance Tester Manchester